Другие журналы

scientific edition of Bauman MSTU


Bauman Moscow State Technical University.   El № FS 77 - 48211.   ISSN 1994-0408

Transportation, Mining and Construction Machine Building

Analyzing the Wheeled Vehicle Gearbox Structures for Running in Harsh Conditions
# 04, April 2015
DOI: 10.7463/0415.0764202
V.V. Vasiliev, G.O. Kotiev, A.V. Gorbatovski
pp. 29-40
Jet Fans Airing Quarries in Combination with a Device for Aerating
# 01, January 2015
DOI: 10.7463/0115.0755210
I.I. Starostin, A.V. Bondarenko
pp. 32-41
Modelling of the Nonlinear Pneumoelastic Element of the Passenger Bus Revisited
# 12, December 2014
DOI: 10.7463/1214.0747902
V.S. Nadezhdin, P.A. Krasavin, F.A. Faradgev, Z.A. Godgaev
pp. 308-322
Mathematical Modelling to Solve Tasks of Profiled Cross of Robot Systems with a Wheel-Legged Propulsion
# 12, December 2014
DOI: 10.7463/1214.0747961
A.S. Diakov, V.I. Ryazantsev, G.G. Ankinovich
pp. 291-307
The Lower Extremities Exoskeleton Actuator Dynamics Research Taking into Account Support Reaction
# 12, December 2014
DOI: 10.7463/1214.0745388
A.A. Vereikin, A.K. Kovalchuk, L.A. Karginov
pp. 256-278
Work Turbochargers under Reduced Pressure in the Suction Pipe
# 12, December 2014
DOI: 10.7463/1214.0739206
I.V. Filippov
pp. 339–349
The Method of Life Benchmark Tests of a Frictional Tractor Clutches
# 11, November 2014
DOI: 10.7463/1114.0735288
V.M. Sharipov, V.N. Ignatenko, M.I. Dmitriev
pp. 198-212
Analisys and Choice of the Exoskeleton’s Actuator Kinematic Structure
# 07, July 2014
DOI: 10.7463/0714.0717676
A.A. Vereikin, A.K. Kovalchuk, D.B. Kulakov, S.E. Semenov
pp. 72-93
Can a Gearbox Be of Use in an Electric Vehicle?
# 06, June 2014
DOI: 10.7463/0614.0715866
E.E. Baulina, A.V. Krutashov, V.V. Serebryakov
The article conducts a reasoning analysis for using a gearbox in electric motor vehicles, in particular in vehicles with hybrid powertrain. It presents external high-speed characteristics of internal combustion (IC) engines in vehicles with hybrid powertrain engines and electric motors that can be set in vehicles with hybrid powertrain, which are used to compare characteristics of horsepower balance and accelerations of these vehicles both with IC engine and gearbox and with electric motor. To prove the need of a gearbox application, both in the electric vehicle, and in the in vehicle with hybrid powertrain, comparative diagrams of accelerations and power balance of the vehicle with electric motor without a gearbox and with electric motor in combination with the 2-, 3-, 4-staged gearboxes are provided.
Development of Commercial Hybrid Electric Vehicle with Native Key Components
# 06, June 2014
DOI: 10.7463/0614.0715911
S.V. Bakhmutov, A.I. Filonov, I.A. Kulikov
Nowadays, good distribution of electric vehicles and hybrid electric ones is reached. The article describes the prospects of development of medium cargo urban vehicles with hybrid powertrains using components manufactured in Russia. It also describes the advantages and disadvantages of the chosen scheme of powertrain. This requires good analysis and depends on type of the vehicle and key component features. The need to apply the test benches for experimental studies is justified. Also the aim of this article is to study a reasonability of key components manufactured in Russia. The authors describe the construction of an experimental vehicle with a hybrid powertrain. They also developed an algorithm of the vehicle operation with a hybrid powertrain during its movement in the urban cycle, which takes in the drive into account a power balance.
The Mathematical Model of Gear Shifting in a Tractor Gearbox
# 05, May 2014
DOI: 10.7463/0514.0711329
V.M. Sharipov, M.I. Dmitriev, A.S. Zenin
A developed universal mathematical model to accelerate a tractor unit (TU) at gear shifting in the gearbox (GB) with different overlaps and at TU acceleration from rest, for different options of friction clutches (FC) installation on the shafts in the GB allows defining - at the designing stage of GB with FC - their work and slipping time and the acceleration time of a TU which may lead to designing the reliable friction clutches and gearboxes with friction clutches. The proposed calculation method of the work of the friction clutch slipping in the gearbox at bench tests allows transferring test results into the operation loading mode, and, therefore, to perform fine-tuning of gearboxes with friction clutches at bench tests.
Calculating the Spectral Density of the Loading Moment on the Working Body of the Deep Milling Machine at the Design Stage
# 05, May 2014
DOI: 10.7463/0514.0709758
K.V. Fomin, A.I. Zhigulskaya
The paper proposes a model to form the torque on the working body of the deep milling machine in the interaction with the soil and with the forest-bush vegetation growing on the surface, its root system. The load is presented as a sequence of pulses with random parameters and complex structure. The developed approach enables us to determine the spectral density of the loading moment on the milling cutter taking into account the operation conditions, its structure, physical and mechanical properties of soils, and probabilistic characteristics of random operation conditions at the design stage. Probabilistic characteristics of the moment on a cutter are initial information for the analysis of dynamic loads in the drive elements of deep milling machine at the design stage.
Simulation Modeling of Wheeled Vehicle Dynamics on the Stand "Roller"
# 04, April 2014
DOI: 10.7463/0414.0707918
G.O. Kotiev, V.A. Gorelov, A.Y. Zakharov
The article substantiates an urgency to develop the theoretically grounded techniques for the bench tests of automotive engineering. It introduces a new principle to simulate the load operating conditions with moving wheeled vehicle in outdoor environment at the bench «Roller. A mathematical model of wheeled vehicle dynamics both at the bench and on the road has been developed. The mathematical simulation allows us to conduct the theoretical researches of straight-line dynamics of a single wheel on the hard non-deformable support base with different characteristics. The results of mathematical simulation proved the efficiency of the proposed approach and the created mathematical model. Further research trends based on this principle are justified.
Creating the Finite Element Models of Car Seats with Passive Head Restraints to Meet the Requirements of Passive Safety
# 04, April 2014
DOI: 10.7463/0414.0706991
D.Yu. Solopov, V.N. Zuzov
The paper presents the created finite element models of car seats with passive head restraints of three levels of complexity, conducts their analysis in terms of the simulation error assessment and meeting the UNECE Regulations No 25. It discusses the basic principles for designing the finite element models of head restraints and car seats with different complexity. These models are assessed in terms of result errors and effort to develop and find solution, using software packages (ANSYS, Femap and LS-DYNA) that implement the finite element method. Performed calculations based on the finite element method give a possibility to analyze a large data file about the process of emergency loading, which is required to estimate the safety of car seats in the case of the rear-end impact to car.
elibrary crossref ulrichsweb neicon rusycon

About Project
Rambler's Top100
Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00)
© 2003-2024 «Наука и образование»
Перепечатка материалов журнала без согласования с редакцией запрещена
 Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00)